TAPER-LOCK® Intermediate sleeve
Technical data
| Material | cast iron |
|---|---|
| UNSPSC Code | UNSPSC-31171600 |
| Application |
|---|
| The intermediate sleeve can be used where existing parts must be retrofitted with the TAPER-LOCK system; A cylindrical bore is provided as a mounting point for the intermediate sleeve. |
| Version |
|---|
| drilled for TAPER-LOCK bushing |
| Attention |
|---|
| Bushings must be ordered separately |
| Note |
|---|
| for trouble free operation, take the mimimum diameters of the hub (D GG15, D GG25, D St42) in the table into consideration. |
| Assembly |
|---|
| Tightening the screw results in a shrink-fit-type connection on the outside and on the shaft. |
| Suitable to |
|---|
| 09122001 TAPER-LOCK® Bushing type 1008 |
| 09122007 TAPER-LOCK® Bushing type 1215 |
| 09122011 TAPER-LOCK® Bushing type 1610 |
| 09122013 TAPER-LOCK® Bushing type 1615 |
| 09122019 TAPER-LOCK® Bushing type 2517 |
| 09122025 TAPER-LOCK® Bushing type 3030 |
| Tuleja 09122007 TAPER-LOCK® typ 1215 |
| Tuleja 09122011 TAPER-LOCK® typu 1610 |
| Tuleja 09122013 TAPER-LOCK® typu 1615 |
| Tuleja 09122019 TAPER-LOCK® typu 2517 |
| Tuleja 09122025 TAPER-LOCK® typu 3030 |
6 articles
| Article number | Enter quantity | Availability | Delivery date | Total price | Actions |
|---|
General product information
A selection of our related products
