Bearing bush APSOplast® PA 66, mod.
Technical data
| Material | polyamide 66 |
|---|---|
| Material additive | 30% glass fibre + 12% PTFE |
| Abbreviated material designation | PA 66 GF30 SL |
| Manufacturing process | injection moulding |
| Color | beige |
| Working temperature range | from -30 to +110 °C |
| Max. operating temperature short term | +130 °C |
| Load specific max., static | 25 N/mm² |
| PV value max. for dry running condition | 0.18 N/mm² · m/s |
| EC Norm | 1907/2006/EU (REACH), 2011/65/EU (RoHS) |
| UNSPSC Code | UNSPSC-31171509 |
| Application |
|---|
| as radial bearing for low wear operation at high load and temperatures, e.g.for lever- and hinged bearings, guides and bearing for stroke and rotation with harfened corrugated, also for dry running operations. |
| Version |
|---|
| without flange |
| Attention |
|---|
| backlash-free precision bearing not possible due to the absorption of moisture. |
| On request |
|---|
| in other dimensions; in other plastic materials e.g. POM, PEEK etc. in lathed versions from our Service-Center |
| Assembly |
|---|
| Case boring H7, recommended shaft tolerances h9; for further bearing layouts our plastics specialists are at your disposal. |
| Characteristics |
|---|
| low cost axial-radial bearing with good pressure and wear resistance and high form stability |
8 articles
| Article number | Enter quantity | Availability | earliest delivery date | Total price | Actions |
|---|